Definition for Security Assessment Techniques

This project article’s focus is to define, where practical, nomenclature and definitions of the differing security assessment types. Agreement and establishment of these definitions are foundational to establishing the Assessment Levels later within this project.

Application Assessment Types - Defined:

Application Threat Assessment – Analyzes application architectural information to develop a threat profile for the application components. Threat assessments:

• Identify the nature of the threats – the likely vulnerabilities of the given application and business.

• Estimate the probability that those vulnerabilities might lead to a disruption and the type of impact – both expected and worst case – that might arise.

• Analyze the different consequences and their likelihood of occurrence and determine which should be dealt with and what priority should be attached to mitigate.

While the threats for each asset within the Application can be individually developed and mapped, a more efficient approach is to develop a master list of threat types and identify how these can be used to launch an attack on the Application and/or its components and potentially in turn the business itself. A single threat may exploit a vulnerability to damage different types of assets. Conversely, several threat types may exploit disparate vulnerabilities in order to attack a single critical asset. Given the many-to-many relationships between threats and assets, it is best to use a simple representation of threat to asset mapping by listing threat types by each critical asset identified.

A threat assessment should categorize threat types and threat agents but should focus on malicious threats and will not cover accidental and natural threats. The source of Malicious Threats (the attacker or perpetrator, in this context) can be classified as unauthorized and authorized. Threat vectors and operating environment more fully define how and why a particular “user” falls into one of these categories:

Unauthorized:

• An attacker who does not have credentials to legitimately access the application

Authorized:

• A legitimate user of the application
• A malicious insider
• A previously unauthorized user who has gained authorized access through compromise of a valid account or user session

While the threat agents may have the similar intent, varying reasons for engaging in illegal activities motivates them. Some authorized employees may willfully commit fraud for financial gain or engage in sabotage in order to disrupt routine operations. Theft, vandalism, intentional corruptions and alteration of information are also categorized as malicious threats.

Advantages:

• Aids in focusing testing activities and defining true targets in large scale enterprise level applications.
• By using results from Threat Assessment, the end-client is able to focus assessment (testing) activities based on business requirements and operational reality.
• Allows vulnerabilities discovered in other assessment types to be weighted and prioritized based on threat probability vs. raw vulnerability finding.

Disadvantages:

• Cannot guarantee that all possible security threats will be uncovered.
• End-client must evaluate analysis and determine action(s).
• Requires existence of application architecture documentation.
• Often confused with Risk Assessments, which weigh asset value, threat, and vulnerability in order to determine business risk. Threat assessments focus on identifying only the threat component (vector(s) and probability).

Recommended use:

• Best as a precursor to development activities allowing best use of security dollars (i.e., “bake in” security during application development begets higher return on investment vs. “bolting on” application security fixes post production).
• Best utilized to determine the need and extent for further assessment (testing) activities (e.g., automated testing, expert testing, code review, etc.).

Application Architecture Review – Typically a table-top design level review and analysis of the application to identify critical assets, sensitive data stores and business critical interconnections. The purpose of architecture reviews is to also aid in determining potential attack vectors, which could be used in testing. Thus the reason many organizations will blend this activity with Threat Assessment. The review of the application and their interconnections should include both a network- and application-level evaluation. Evaluation should identify areas of potential and actual vulnerability from these levels. This includes areas of vulnerability in the network and application architecture, in addition to a high-level measure of risk of each of those areas.

Advantages:

• Aids in focusing testing activities and defining true targets in large scale enterprise level applications.
• Provides more depth to the development rationale of various functionality in the application life cycle.
• By using results from Architecture Review, the assessment (testing) team is able to follow development logic in the “how” and “why” business and security requirements were integrated into application behavior and security controls/constraints.

Disadvantages:

• Cannot guarantee identification of all possible security threats.
• Because the scope of an architectural assessment is far more complex than the limited perspective of an application layer assessment, recommendations are similarly complex, sometimes involving “political” changes (i.e., security department’s level of involvement in the SDLC).
• Requires on-site discussions with application principals.

Recommended use:

• Best as a precursor to development activities allowing best use of security dollars (i.e., incorporate security in beginning begets higher return on investment vs. fixing applications post production).
• Best utilized to determine the need and extent for further assessment (testing) activities (e.g., automated testing, expert testing, code review, etc.).

Automated Testing (Application Scanning (Tool Based)) – Utilizing automated open source or commercial software to discover known application layer vulnerabilities.

Advantages:

• Able to quickly identify default content, misconfigurations and error conditions resulting from improper input.
• Ability to be run on automated, regular basis to provide baseline and ongoing vulnerability management metrics.
• Can reduce the time required to assess large applications.
• Lower cost to operate/execute (excluding initial capital cost if using commercial testing software).

Disadvantages:

• Not designed to determine the extent to which the vulnerabilities can be exploited to compromise the data the application handles.
• Requires appropriate skills/knowledge to use, configure, and interpret results (despite “point and click” vendor marketing claims).
• Requires extensive configuration and customization to emulate a user session.
• Limited ability to correlate events and correlate minor issues that may lead to larger exposure.
• Inability to adapt to dynamic responses in business logic flows.
• Unable to find vulnerabilities that only become apparent after performing a sequence of steps (e.g., business logic flow bypass, session state compromise, etc.).
• Unable to figure out “how deep the rabbit hole goes” – No means to interpret security implications, express extent of potential compromise, or identify seriousness of business and information exposure.
• Tools will often be confused by some aspect of an application's behavior, causing a particular class of test to generate a false positive. Because most tools lack intelligence and cannot adapt to such conditions, test results include a large number of identical false positives.
  • For valid findings, the tools will often find dozens or hundreds of nearly identical findings, each with the same root cause.
• Tool based findings are only indications of problems. Manual review (by someone well versed in web application testing) is usually necessary to draw the necessary parallels between different findings, and determine which findings identify unique problems, and which represent repetition.

Recommended use:

• Handling routine, manually intensive steps (e.g., input validation, field “fuzzing”, etc.) in an assessment is useful, particularly in large applications. However, scanner-based results can be used as the starting point from which expert testing can take over.
• Testing less critical applications (i.e., applications that do not contain/handle business sensitive data and/or are not critical to business operation) where the perceived lower risk does not warrant performing hands-on testing.

If a tool is used, it is important to define the technical limitations of the tool when the findings are presented. An example of this may involve noting the potential for SQL injection attacks based upon verbose SQL error messages, but also the tool’s inability to produce the correct syntax needed to extract specific information from the vulnerable database. A failure to convey the differences between automated and expert testing increases the risk that the application assessment results will be interpreted as being more “secure” than they actually are.

Expert Testing (Hands On Based) – “Expert Testing” involves application analysis performed by an experienced analyst, usually using a combination of open source automated utilities (either self created or through security community) for performing task-specific functions and hands-on analysis to attempt to further ‘hack’ the application as an attacker.

Advantages:

• Open source tools utilized by the expert tester are developed usually for specific purposes rather than wrapping multiple functionality into a GUI. Typically are one of many components in the testers toolkit.
• “Expert testing” is an intuitive approach (Business logic analysis), with the ability to identify flaws in business logic that automated scanners are usually incapable of finding.
• Addresses many of the disadvantages noted in Automated Testing.
• Ability to correlate events and minor issues that may lead to larger exposure. This is a critical advantage of hands-on testing and simulates how a real attacker would operate.
• Ability to communicate complex technical findings in a manner that all can understand. The job is not done until the assessment end-client understands the nature of the vulnerability discovered and its security implications.
  • The analysis phase of expert testing provides “root cause” identification and recommendations based upon the unique, developmental characteristics of an application. Results from an automated tool cannot provide customized, specific recommendations tailored for each application and the end-client’s requirements.

Disadvantages:

• Often confused with Automated Testing – Marketing of commercial tools uses terms such as “expert” and “intuitive”, normally associated with an assessment performed by an experienced analyst.
• Inability of most end-client organizations to determine if tester has appropriate application security skills required. There are no community accepted credentials/certifications established for this area of security.
• Cost to conduct will be higher though there is no upfront capital cost.
• Without establishing clear metrics up front, ongoing testing to determine trends within business environment or iterations of application is difficult.

Recommended use:

• Testing critical applications (i.e., applications that do contain/handle business sensitive data and/or are critical to business operation) where the perceived higher risk does not warrant performing automated testing.
• Best suited for B2B, B2C and/or any transactional based and/or multi-level access application.

Application Code Review – Reviews the underlying foundational level to identify coding issues, which may create/enable an attacker to compromise an applications systems and/or business functionality. Web applications in particular are likely to have these vulnerabilities, as they are frequently developed quickly in an environment that does not allow for much security planning and testing. This should not be viewed as simply a generic software audit. Code reviews should be specifically tailored to find vulnerabilities common in applications.

Advantages:

• If integrated into application SDLC, coding issues can be resolved early in the development and functional testing process. (which is much less expensive to fix than a post-production revision of the code).
• Provides the ability to identify and address serious coding issues (e.g., input validation, hard-coded credentials, debugging features, etc.) prior to production.
• …

Disadvantages:

• …
• If conducted solely by tools, results will be mostly static signature matching though some tools claim to walk codepath (follow nested loops and other regression through objects).
• Even applications that exhibit strong and thorough software development practices (e.g., documentation, seamless modularity, string checking to prevent buffer overflows, etc.) can fall victim to attack if the underlying business logic doesn’t follow security requirements.
• Requires specific programming expertise (e.g., Java, .NET, PHP, etc.) that many application testers do not have.

Recommended use:

• …

References/Sources:

• Testing Taxonomy &�Testing Tools Classification : http://www.owasp.org/index.php/Image:AppSec2005DC-Arian_Evans_Tools-Taxonomy.ppt

This article is a stub. You can help OWASP by expanding it or discussing it on its Talk page.