Difference between revisions of "CLASP Security Principles"

Revision as of 01:23, 24 May 2006

Overview

This CLASP Resource is meant as a set of basic principles for all members of your application-security project.

Ethics in Secure-Software Development

Software development organizations should behave ethically as a whole, but should not expect that their individual components will.

In so far as security goes, it is ethical not to expose a user to security risks that are known and will not be obvious to the user, without clearly informing the user of those risks (and preferably, mitigation strategies).

It is also ethical to provide users with a specific privacy policy for use of their personal information in a timely manner so that they can act to avoid undesired use of that information, if they so desire. Additionally, if you change a privacy policy, the user should be given the explicit choice either to accept the change or to have his personal data expunged.

Additionally, if you have a system that is compromised on which user data resides, it is ethical to inform users of the breach in privacy. If the data resides in the state of California, this is required by law. Similar regulations may apply in other jurisdictions.

Do not expect that all other people on the development team will be ethical. Insiders play a significant factor in over 50% of corporate security breaches. Particularly at risks are those employees that are silently disgruntled or have recently left the company.

Insider Threats as the Weak Link

Most development organizations overlook “insider” risks — i.e., those users with inside access to the application, whether it be in deployment or development. For example, when planning for deployments it is easy to assume “a firewall will be there,” although, even when true, there are many techniques for circumventing a firewall.

Most development organizations completely ignore the risks from the guy in the next cube or on the next floor, the risks from the secretaries and the janitors, the risks from those who have recently quit or been fired. This, despite yearly numbers from the Computer Crime and Security Survey performed by the Computer Security Institute and the FBI, which shows that over half of all security incidents have an inside angle.

This suggests that trusting the people around you isn’t good enough. Not only might people be disgruntled or susceptible to bribe that you may not expect, but people are often susceptible to accidentally giving insider help by falling victim to social engineering attacks.

Social engineering is when an attacker uses his social skills (generally involving deception) to meet his security ends. For example, he may convince technical support that he is a particular user who has forgotten his password, and get the password changed over the phone. This is why many people have moved to systems where passwords can be reset automatically only using a “secret question” — although secret questions are a bit too repetitive... if someone is being targeted, it is often easy to figure out the mother’s maiden name, the person’s favorite color, and the name of his or her pets.

Assume the Network is Compromised

There are many categories of attack that can be launched by attackers with access to any network media that can see application traffic. Many people assume wrongly that such attacks are not feasible, assuming that it is “difficult to get in the middle of network communications,” especially when most communications are from ISP to ISP.

One misconception is that an attacker actually needs to “be in the middle” for a network attack to be successful. Ethernet is a shared medium, and it turns out that attacks can be launched if the bad guy is on one of the shared segments that will see the traffic. Generally, the greatest risk lies in the local networks that the endpoints use.

Many people think that plugging into a network via a switch will prevent against the threat on the local network. Unfortunately, that is not true, as switches can have their traffic intercepted and monitored using a technique called ARP spoofing. And even if this problem were easily addressed, there are always attacks on the physical media that tend to be easy to perform.

As for router infrastructure, remember that most routers run software. For example, Cisco’s routers run IOS, an operating system written in C that has had exploitable conditions found in it in the past. It may occasionally be reasonable for an attacker to truly be “in the middle.”

Another misconception is that network-level attacks are difficult to perform. There are tools that easily automate them. For example, “dsniff” will automate many attacks, including man-in-the-middle eavesdropping and ARP spoofing.

Well known network-level threats include the following:

• Eavesdropping — Even when using cryptography, eavesdropping may be possible when not performing proper authentication, using a man-in-the-middle attack.
• Tampering — An attacker can change data on the wire. Even if the data is encrypted, it may be possible to make significant changes to the data without being able to decrypt it. Tampering is best thwarted by performing ongoing message authentication (MACing), provided by most high-level protocols, such as SSL/TLS.
• Spoofing — Traffic can be forged so that it appears to come from a different source address than the one from which it actually comes. This will thwart authentication systems that rely exclusively on IP addresses and/or DNS names for authentication.
• Hijacking — An extension of spoofing, established connections can be taken over, allowing the attacker to enter an already established session without having to authenticate. This can be thwarted with ongoing message authentication, which is provided by most high-level protocols, such as SSL/TLS.
• Observing — It is possible to give away security-critical information even when a network connection is confidentiality-protected through encryption. For example, the mere fact that two particular hosts are talking may give away significant information, as can the timing of traffic. These are generally examples of covert channels (non-obvious communication paths), which tend to be the most difficult problem in the security space.

Minimize Attack Surface

For a large application, a rough yet reliable metric for determining overall risk is to measure the number of input points that the application has — i.e., attack surface. The notion is that more points of entry into the application provides more avenues for an attacker to find a weakness.

Of course, any such metric must consider the accessibility of the input point. For example, many applications are developed for a threat model where the local environment is trusted. In this case, having a large number of local input points such as configuration files, registry keys, user input, etc., should be considered far less worrisome than making several external network connections.

Collapsing functionality that previously was spread across several ports onto a single port does not always help reduce attack surface, particularly when the single port exports all the same functionality, with an infrastructure that performs basic switching. The effective attack surface is the same unless the actual functionality is somehow simplified. Since underlying complexity clearly plays a role, metrics based on attack surface should not be used as the only means access control should be mandatory of analyzing risks in a piece of software.

Secure-by-Default

A system’s default setting should not expose users to unnecessary risks and should be as secure as possible. This means that all security functionality should be enabled by default, and all optional features which entail any security risk should be disabled by default.

It also means that — if there is some sort of failure in the system — the behavior should not cause the system to behave in an insecure manner (the “fail-safe” principle). For example, if a connection cannot be established over SSL, it is not a good idea to try to establish a plaintext connection.

The “secure-by-default” philosophy does not interact well with usability since it is far simpler for the user to make immediate use of a system if all functionality is enabled. He can make use of functionality which is needed and ignore the functionality that is not.

However, attackers will not ignore this functionality. A system released with an insecure default configuration ensures that the vast majority of systems-in-the-wild are vulnerable. In many circumstances, it can even become difficult to patch a system before it is compromised.

Therefore, if there are significant security risks that the user is not already accepting, you should prefer a secure-by-default configuration. If not, at least alert the user to the risks ahead of time and point him to documentation on mitigation strategies.

Note that, in a secure-by-default system, the user will have to explicitly enable any functionality that increases his risk. Such operations should be relatively hidden (e.g., in an “advanced” preference pane) and should make the risks in disabling the functionality readily apparent.

Defense-in-Depth

The principle of defense-in-depth is that redundant security mechanisms increase security. If one mechanism fails, perhaps the other one will still provide the necessary security. For example, it is not a good idea to rely on a firewall to provide security for an internal-use-only application, as firewalls can usually be circumvented by a determined attacker (even if it requires a physical attack or a social engineering attack of some sort).

Implementing a defense-in-depth strategy can add to the complexity of an application, which runs counter to the “simplicity” principle often practiced in security. That is, one could argue that new protection functionality adds additional complexity that might bring new risks with it. The risks need to be weighed. For example, a second mechanism may make no sense when the first mechanism is believed to be 100% effective; therefore, there is not much reason for introducing the additional solution, which may pose new risks. But usually the risks in additional complexity are minimal compared to the risk the protection mechanism seeks to reduce.

Principles for Reducing Exposure

Submarines employ a trick that makes them far less risky to inhabit. Assume that you are underwater on a sub when the hull bursts right by you. You actually have a reasonable chance of survival, because the ship is broken up into separate airtight compartments. If one compartment takes on water, it can be sealed off from the rest of the compartments.

Compartmentalization is a good principle to keep in mind when designing software systems. The basic idea is to try to contain damage if something does goes wrong. Another principle is that of least privilege, which states that privileges granted to a user should be limited to only those privileges necessary to do what that user needs to do. For example, least privilege argues that you should not run your program with administrative privileges, if at all possible. Instead, you should run it as a lesser user with just enough privileges to do the job, and no more.

Another relevant principle is to minimize windows of vulnerability. This means that — when risks must be introduced — they should be introduced for as short a time as possible (a corollary of this is “insecure bootstrapping”). In the context of privilege, it is could to account for which privileges a user can obtain, but only grant them when the situation absolutely merits. That supports the least privilege principle by granting the user privileges only when necessary, and revoking them immediately after use.

When the resources you are mitigating access in order to live outside your application, these principles are usually easier to apply with operational controls than with controls you build into your own software. However, one highly effective technique for enforcing these principles is the notion of privilege separation. The idea is that an application is broken up into two portions, the privileged core and the main application. The privileged core has as little functionality as absolutely possible so that it can be well audited. Its only purposes are as follows:

• Authenticate new connections and spawn off unprivileged main processes to handle those connections.
• Mediate access to those resources which the unprivileged process might legitimately get to access. That is, the core listens to requests from the children, determines whether they are valid, and then executes them on behalf of the unprivileged process.

This technique compartmentalizes each user of the system into its own process and completely removes all access to privileges, except for those privileges absolutely necessary, and then grants those privileges indirectly, only at the point where it is necessary.

The Insecure-Bootstrapping Principle

Insecure bootstrapping is the principle that — if you need to use an insecure communication channel for anything — you should use it to bootstrap a secure communication channel so that you do not need to use an insecure channel again.

For example, SSH is a protocol that provides a secure channel after the client and server have authenticated each other. Since it does not use a public key infrastructure the first time the client connects, it generally will not have the server credentials. The server sends its credentials, and the client just blindly accepts that they’re the right ones. Clearly, if an attacker can send his own credentials, he can masquerade as the server or launch a man-in-the-middle attack.

But, the SSH client remembers the credentials. If the credentials remain the same, and the first connection was secure, then subsequent connections are secure. If the credentials change, then something is wrong — i.e., either an attack is being waged, or the server credentials have changed — and SSH clients will generally alert the user.

Of course, it is better not to use an insecure communication channel at all, if it can be avoided.