This site is the archived OWASP Foundation Wiki and is no longer accepting Account Requests.
To view the new OWASP Foundation website, please visit https://owasp.org

Testing for CSRF (OTG-SESS-005)

From OWASP
Revision as of 12:40, 12 October 2006 by Mmeucci (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

OWASP Testing Guide v2 Table of Contents

What's session riding?

Note: There is no unified terminological consistant for the class of vulnerabilities which we are going to discuss next. We will stick to “Session Riding”, which is the term used in [3]; another term used in literature is “Cross Site Request Forgeries (CSRF)” [2]. This confusion appears to originate from the fact that these vulnerabilities, which were first analyzed in 2000 [1], are often rediscovered different people – and are soon forgotten. By no means is this indicative of low importance; rather, it is surprising that vulnerabilities whose impact may be so severe get constantly neglected. But let’s move on with the details.

Session riding is about forcing an unknowing user to execute unwanted actions on a web application in which he is currently authenticated.

The way this is accomplished relies on the following facts:

1) web browser behavior regarding the handling of session-related information such as cookies and http authentication information; 2) knowledge of valid web application URLs on the side of the attacker; 3) application session management relying only on information which is known by the browser; 4) existence of HTML tags whose presence cause immediate access to an http[s] resource; for example the image tag img.

Points 1, 2, and 3 are essential for the vulnerability to be present, while point 4 is accessory and facilitates the actual exploitation, but is not strictly required.

Point 1) Browsers automatically send information which is used to identify a user session. Suppose site is a site hosting a web application, and the user victim has just authenticated himself to site. In response, site sends victim a cookie which identifies requests send by victim as belonging to victim’s authenticated session. Basically, once the browser receives the cookie set by site, it will automatically send it along with any further requests directed to site.

Point 2) If the application does not make use of session-related information in URLs, then it means that the application URLs, their parameters and legitimate values may be identified (either by code analysis or by accessing the application and taking note of forms and URLs embedded in the HTML/Javascript).

Point 3) By “known by the browser” we mean information such as cookies or http-based authentication information (such as Basic Authentication; NOT form-based authentication), which are stored by the browser and subsequently resent at each request directed towards an application area requesting that authentication. The vulnerabilities discussed next apply to applications which rely entirely on this kind of information to identify a user session.

Suppose, for simplicity's sake, to refer to GET-accessible URLs (though the discussion applies as well to POST requeests). If victim has already authenticated himself, submitting another request causes the cookie to be automatically sent with it (see picture, where the user accesses an application on www.example.com).

Session riding.GIF


The GET request could be originated in several different ways:

  • by the user, who is using the actual web application;
  • by the user, who types the URL it directly in the browser;
  • by the user, who follows a link (external to the application) pointing to the URL.

These invocations are indistinguishable by the application. In particolar, the third may be quite dangerous. There is a number of techniques (and of vulnerabilities) which can disguise the real properties of a link. The link can be embedded in a email message, or appear in a malicious web site where the user is lured, i.e. the link appears in content hosted elsewhere (another web site, an HTML email message, etc.) and points to a resource of the application. If the user clicks on the link, since it was already authenticated by the web application on site, the browser will issue a GET request to the web application, accompanied by authentication information (the session id cookie). This results in a valid operation performed on the web application – probably not what the user expects to happen! Think of a malicious link causing a fund transfer on a web banking application to appreciate the implications...

By using a tag such as img, as specified in point 4 above, it is not even necessary that the user follows a particular link. Suppose the attacker sends the user an email inducing him to visit an URL referring to a page containing the following (oversimplified) HTML:

<html><body>

...

<img src=”https://www.company.example/action” width=”0” height=”0”>

...

</body></html>


What the browser will do when it displays this page is that it will try to display the specified zero-width (i.e., invisible) image as well. This results into a request being automatically sent to the web application hosted on site. It is not important that the image URL does not refer to a proper image, its presence will trigger the request specified in the src field anyway; this happens provided that images download is not disabled in the browsers, which is a typical configuration since disabling images would cripple most web applications beyond usability.

The problem here is a consequence of the following facts:

  • there are HTML tags whose appearance in a page result in automatic http request execution (img being one of those);
  • the browser has no way to tell that the resource referenced by img is not actually an image and is in fact not legitimate;
  • image loading happens regardless of the location of the alleged image, i.e. the form and the image itself need not be located in the same host, not even in the same domain. While this is a very handy feature, it makes difficult to compartmentalize applications.

It is the fact that HTML content unrelated to the web application may reference components in the application, and the fact that the browser automatically composes a legal request towards the application, that allows such kind of attacks. As the standards are defined right now, there is no way to prohibit this behavior unless it is made impossible for the attacker to specify valid application URLs. This means that valid URLs must contain information related to the user session, which is supposedly not known by the attacker and therefore make the identification of such URLs not possible.

The problem might be even worse, since in integrated mail/browser environments simply displaying an email message containing the image would result in the execution of the request to the web application with the associated browser cookie.

Things may be obfuscated further, by referencing seemingly valid image URLs such as

<img src=”https://[attacker]/picture.gif” width=”0” height=”0”>

where [attacker] is a site controlled by the attacker, and by utilizing a redirect mechanism on http://[attacker]/picture.gif to http://[thirdparty]/action.

Cookies are not the only example involved in this kind of vulnerability. Web applications whose session information is entirely supplied by the browser are vulnerable too. This includes applications relying on HTTP authentication mechanisms alone, since the authentication information is known by the browser and is sent automatically upon each request. This DOES NOT include form-based authentication, which occurs just once and generates some form of session-related information (of course, in this case, such information is expressed simply as a cookie and can we fall back to one of the previous cases).

Sample scenario.

Let’s suppose that the victim is logged on a firewall web management application. To log in, a user has to authenticate himself; subsequently, session information is stored in a cookie.

Let's suppose our firewall web management application has a function that allows an authenticated user to delete a rule specified by its positional number, or all the rules of the configuration if the user enters ‘*’ (quite a dangerous feature, but will make the example more interesting). The delete page is shown next. Let’s suppose that the form – for the sake of simplicity – issues a GET request, which will be of the form

https://[target]/fwmgt/delete?rule=1

(to delete rule number one)

https://[target]/fwmgt/delete?rule=*

(to delete all rules).

The example is purposely quite naive, but shows in a simple way the dangers of Session Riding.

Session Riding Firewall Management.gif

Therefore, if we enter the value ‘*’ and press the Delete button the following GET request is submitted.

https://www.company.example/fwmgt/delete?rule=*


with the effect of deleting all firewall rules (and ending up in a possibly inconvenient situation...).

Session Riding Firewall Management 2.gif


Now, this is not the only possible scenario. The user might have accomplished the same results by submitting by hand the URL https://[target]/fwmgt/delete?rule=*

or by following a link pointing, directly or via a redirection, to the above URL. Or, again, by accessing an HTML page with an embedded img tag pointing to the same URL.

In all of these cases, if the user is currently logged in the firewall management application, the request will succeed and will modify the configuration of the firewall.

One can imagine attacks targeting sensitive applications and making automatic auction bids, money transfers, orders, changing the configuration of critical software components, etc.

An interesting thing is that these vulnerabilities may be exercised behind a firewall; i.e., it is sufficient that the link being attacked be reachable by the victim (not directly by the attacker). In particular, it can be any Intranet web server; for example, the firewall management station mentioned before, which is unlikely to be exposed to the Internet. Imagine a Session Riding attack targeting an application monitoring a nuclear power plant... Sounds far fetched? Probably, but it is a possibility.

Self-vulnerable applications, i.e. applications that are used both as attack vector and target (such as web mail applications), make things worse. If such an application is vulnerable, the user is obviously logged in when he reads a message containing a Session Riding attack, that can target the web mail application and have it perform actions such as deleting messages, sending messages appearing as sent by the user, etc.

Countermeasures.

The following countermeasures are divided among recommendations to users and to developers.

Users

Since Session Riding vulnerabilities are reportedly widespread, it is recommended to follow best practices to mitigate risk. Some mitigating actions are:

  • Logoff immediately after using a web application
  • Do not allow your browser to save username/passwords, and do not allow sites to “remember” your login
  • Do not use the same browser to access sensitive applications and to surf freely the Internet; if you have to do both things at the same machine, do them with separate browsers.

Integrated HTML-enabled mail/browser, newsreader/browser environments pose additional risks since simply viewing a mail message or a news message might lead to the execution of an attack.

Developers

Add session-related information to the URL. What makes the attack possible is the fact that the session is uniquely identified by the cookie, which is automatically sent by the browser. Having other session-specific information being generated at the URL level makes it not possible for the attacker to know the structure of URLs to attack.

Other countermeasures, while they do not resolve the issue, contribute to make it harder to exploit.

Use POST instead of GET. While POST requests may be simulated by means of Javascript, they make it more complex to mount an attack. The same is true with intermediate confirmation pages (such as: “Are you sure you really want to do this?” type of pages). They can be bypassed by an attacker, although they will make their work a bit more complex. Therefore, do not rely solely on these measures to protect your application. Automatic logout mechanisms somewhat mitigate the exposure to these vulnerabilities, though it ultimately depends on the context (a user who works all day long on a vulnerable web banking application is obviously more at risk than a user who uses the same application occasionally).

Another countermeasure is to rely on Referer headers, and allow only those requests which appear to originate from valid URLs. While Referer headers may be faked, they do provide minimal protection – for example, they inhibit attacks via email.

How to Test

Black Box

To test black box, you need to know URLs in the restricted (authenticated) area. If you possess valid credentials, you can assume both roles – the attacker and the victim. In this case, you know the URLs to be tested just by browsing around the application.

Otherwise, if you don’t have valid credentials available, you have to organize a real attack, and so induce a legitimate, logged in user into following an appropriate link. This may involve a substantial level of social engineering.

Either way, a test case can be constructed as follows:

  • let u the URL being tested; for example, u = http://www.example.com/action
  • build an html page containing the http request referencing url u (specifying all relevant parameters; in case of http GET this is straightforward, while to automatize a POST request you need to resort to some Javascript);
  • make sure that the valid user is logged on the application;
  • induce him into following the link pointing to the to-be-tested URL (social engineering involved if you cannot impersonate the user yourself);
  • observe the result, i.e. check if the web server executed the request.

White Box

Audit the application to ascertain if its session management is vulnerable. If session management relies only on information available to the browser, the application is vulnerable. By “information available to the browser” we mean cookies and HTTP authentication credentials (Basic Authentication and other forms of HTTP authentication; NOT form-based authentication, which is an application-level authentication). For an application to not be vulnerable, it must include session-related information in the URL, in a form not identifiable or predictable by the user ([3] uses the term secret to refer to this piece of information).

Resources accessible via HTTP GET requests are easily vulnerable, though POST requests can be automatized via Javascript and are vulnerable as well; therefore, the use of POST alone is not enough to correct the occurrence of Session Riding vulnerabilities.

References

Examples

See discussion above in the text.


Whitepapers

This issue seems to get rediscovered from time to time, under different names. A history of these vulnerabilities has been reconstructed in http://www.webappsec.org/lists/websecurity/archive/2005-05/msg00003.html


References

  • [1] Oldest known post

http://www.zope.org/Members/jim/ZopeSecurity/ClientSideTrojan

  • [2] Reported as Cross-Site Request Forgeries

http://www.tux.org/~peterw/csrf.txt

  • [3] Session Riding, whitepaper, Thomas Schreiber

http://www.securenet.de/papers/Session_Riding.pdf

Tools

Currently there are no automated tools that can be used to test for the presence of session riding vulnerabilities. However, you may use your favorite spider/crawler tools to acquire knowledge about the application structure and to identify the URLs to test.

OWASP Testing Guide v2 Table of Contents