This site is the archived OWASP Foundation Wiki and is no longer accepting Account Requests.
To view the new OWASP Foundation website, please visit https://owasp.org

Difference between revisions of "OWASP JBroFuzz Tutorial"

From OWASP
Jump to: navigation, search
m
Line 356: Line 356:
 
-Database.java
 
-Database.java
 
-Fuzzer.java
 
-Fuzzer.java
 +
-FuzzerBigInteger.java
 
-NoSuchFuzzerException.java
 
-NoSuchFuzzerException.java
 
-Prototype.java
 
-Prototype.java
 
</pre>
 
</pre>
  
The class of importance is Fuzzer.java. Within JBroFuzz a Fuzzer is an instance of a java Iterator. This implies that values can be accessed by simply calling the <code>next()</code> method once an object has been made available. Typically, a call to <code>hasNext()</code> should also be performed prior to avoid an exception being thrown.
+
The class of importance is Fuzzer.java. If you are going to use recursive iterators of great length, there is also FuzzerBigInteger.java. The difference between the two is that Fuzzer.java uses the primitive java data type long (up to 16^16 values) while FuzzerBigInteger.java uses java BigInteger to perform the counting. Naturally, the class FuzzerBigInteger is slower and takes more memory than the Fuzzer class.
 +
 
 +
Within JBroFuzz a Fuzzer is an instance of a java Iterator. This implies that values can be accessed by simply calling the <code>next()</code> method once an object has been made available. Typically, a call to <code>hasNext()</code> should also be performed prior to avoid an exception being thrown.
  
 
A Fuzzer can be obtained from the factory method <code>createFuzzer(String, int);</code> available for every instance of the fuzzing Database. Ergo:
 
A Fuzzer can be obtained from the factory method <code>createFuzzer(String, int);</code> available for every instance of the fuzzing Database. Ergo:
Line 395: Line 398:
 
</pre>
 
</pre>
  
A command of: <code>javac -classpath JBroFuzz.jar HelloFuzzer.java</code> should compile the above program on command line.  
+
To compile the above use:
 +
 
 +
<pre>
 +
javac -classpath ".\jbrofuzz\jar\JBroFuzz.jar" HelloFuzzer.java
 +
</pre>
 +
 
 +
This assumes that you are currently inside the directory where HelloFuzzer.java resides and that the JBroFuzz.jar is located two directories within your current location i.e. in jbrofuzz/jar.
  
 
Within the JBroFuzz.jar file, there is a file called fuzzers.jbrofuzz that carries all the fuzzer definitions that you see in the UI payloads tab of JBroFuzz.
 
Within the JBroFuzz.jar file, there is a file called fuzzers.jbrofuzz that carries all the fuzzer definitions that you see in the UI payloads tab of JBroFuzz.

Revision as of 14:48, 23 December 2009


Introduction

“If you can’t fuzz with JBroFuzz, you probably do not want to fuzz!”

Old JBroFuzz Motto


The art of teaching, Mark Van Doren said, is the art of assisting discovery. Fuzzing is a representative discipline towards assisting the discovery of security vulnerabilities, that is just beginning to come of age. Over the last two years, through continuous development, JBroFuzz has attempted to expose the intrinsic beauty of the subject: Constantly submit a vast amount of payloads to a service, device or prompt, waiting for the one response that makes all the difference. This is the mentality that JBroFuzz embraces and attempts to offer back to security professionals.

Fuzzing as a concept goes beyond a conventional work flow or a standard methodology. I would argue that to know how to fuzz well, is to master a new language. Thus, similar to the process of learning a programming (or foreign) language, there are three things you must master:

• Grammar: How fuzzing as a process is structured
• Vocabulary: How to name fuzzing concepts you want to use
• Usage: Ways of achieving everyday effective results with fuzzing

JBroFuzz Splash Screen
From the pre-existing information available for JBroFuzz, this tutorial focuses on usage: How to best put a fuzzing tool to good use, either via the UI, or using APIs that JBroFuzz.jar is constituted of. As a result, this document has a small requirement as a caveat; you need to have a beginner level understanding of the Java programming language in order to understand some sections.

There are a number of working examples described here within, which grep for statements such as “public static void main(String[] args)”. The majority of the content relates to reviewing these examples and putting the Java syntax into a fuzzing perspective.

To summarise, this tutorial focuses on customary and effective usage of fuzzing through the JBroFuzz Java APIs and the respective UI. It is targeting (without attacking them) web applications. Without further redo, let’s get fuzzing!

JBroFuzz Basic Functionality

This section carries a number of basic fuzzing examples to get you started with JBroFuzz. Overall, even though the actions performed to not produce any amazing fuzzing results, it serves as a starting point in understanding how to perform particular fuzzing operations on web applications.

'Hello Google!' (forget 'Hello World')

As the traditional first program that you learn when indulging in a new programming language, 'Hello World!' represents the norm for understanding the basic output operations and syntax (let alone compiler and execution behaviour) of the language in question.

As with most web application security related tools, when I am given the responsibility to run them, often in order to understand how they work, I would first craft a legitimate, single request to a trusted (to be up and behaving) popular Internet location. Needless, to say this request more than on occasion finds itself on Google servers.

So 'Hello World!' for programming languages seems to transform to 'Hello Google!' for understanding how web application security related tools work. Let us see, how JBroFuzz does it.

• Double-click on JBroFuzz and browse to the 'Fuzzing' tab

JBroFuzz is constituted of tabs, typically located in the bottom or top (if you bother to change the settings) of the main window.

The 'Fuzzing' tab is where you craft your request message to a particular host. Once that is in place, you can select any part of the request and proceed into adding any number of payloads. We shall see how in later sections.

• In the 'URL' field type: http://www.google.com/ http://www.google.com

Unlike conventional URLs, the URL field in JBroFuzz is only used for the underlying protocol (HTTP or HTTPS), host name (e.g. www.yahoo.com) and (optionally) port number.

All remaining information pasted or typed into the 'URL' field will be ignored; you are expected to enter it in the 'Request' field below.

Still, if you want to just copy-paste a URL from a browser, hit [Ctrl+L] while you are not fuzzing, paste the URL value that you have copied from a browser and JBroFuzz will automatically do the work for you.

Examples of valid URL values to be put in the

Treat the 'URL' and 'Request' fields as the two stages of a 'telnet' session on port 80; you are effectively using the 'URL' field to specify the equivalent of:

>telnet www.google.com 8088

As equivalent to:

http://www.google.com:8088

or in the case of HTTPS:

https://www.google.com:8088

Naturally, default ports for HTTP is 80 and HTTPS is 443.

• In the 'Request' field type:

GET / HTTP/1.0

And press 'Enter' twice

This is where the body of the message you are sending is to be placed. So anything obeying HTTP/S protocol, such as GET and POST requests, header fields and/or HTML content should be included here.

As part of the process of fuzzing web applications with JBroFuzz you need to have done your homework, in terms of providing a base request message. This message is what will be used later on to add payloads to particular sections of the request.

• Hit 'Start' [Ctrl+Enter]

This will instigate the process of sending a single request to the specified host on a given (or default) port, over HTTP or HTTPS.

Once a connection has been established JBroFuzz will proceed to submit the message you have typed into the 'Request' field.

Finally, JBroFuzz will log all data sent and received into a file; accessing this file is typically a process of double clicking on the output line on the table at the bottom section of the 'Fuzzing' tab.

You should see a response received in the bottom part of the 'Fuzzing' panel. Double click (or right click for more options) to see the information exchanged; typically this would be a 302 redirect pointing you to another location. Congratulations, you have just said "Hello" to Google!

JBroFuzz Hello Google!

Now this would typically be enough under RFC rules, to get a response back; but damn all the bots out here, most websites require further information to respond back. So, in the 'Request' field let's pretend to be a (kind of) legitimate browser by typing:

GET / HTTP/1.0
Host: www.google.com
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.0.10) Gecko/2009042316 Firefox/3.0.10 (.NET CLR 3.5.30729) JBroFuzz/1.5
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8Accept-Language: en-gb,en;q=0.5Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7

Not forgetting to end the request typed with two returns: Press 'Enter' twice. Again, you should be able to see a line added with the response received back.

Practice sending single requests to a website of your choice by changing the URL and also the 'Host:' field from the 'Request' above. Also try accessing an HTTPS website.

Alternatively, you can use the shortcut [Ctrl+L] to type in your URL, with the 'Request' field filled automatically, based on the URL you have typed.

HTTP Version Numbers & www.cia.gov Headerless Responses

For web applications, very often ill-defined requests submitted over the Internet, will trigger semi-legitimate responses that actually do not obey HTTP RFC protocol specification. Often, even though this is not the case in this example, these responses can lead to the identification of one or more security vulnerabilities.

In this example we test for the responses received for invalid HTTP version numbers on a particular website, namely www.cia.gov, over https. Now a word of caution here; please do not attempt to fuzz web applications that you do not have the authority to do so, especially over the Internet.

Still, for the purposes of this tutorial exercise, we will subject a web server to no more than a dozen or so requests. These requests would be otherwise identical, if it was not for the HTTP version number incrementing by a value of 1 on each request.

In terms of having the authority to do so, well this is identical to hitting 'Refresh' in your web browser a dozen or so times, while you are browsing to www.cia.gov. I do not consider this remotely close to any form of hacking, cracking, or proper fuzzing; web servers across the globe receive a lot more abuse than this on a daily basis.

Finally, by the time you are reading this, the particular issue described might have been fixed. So here goes:

• Within JBroFuzz, select:

File -> Open Location [Ctrl+L]

Type: https://www.cia.gov and hit enter. This is depicted in the following screenshot:

JBroFuzz Open Location

Hitting 'Enter' should automatically populate the 'URL' field and the 'Request' field within the 'Fuzzing' tab. What you see is the base request that we intend to add fuzzing payloads to. Before we do so, let us make one small alteration first:

• Modify the first line of the 'Request' field to:

GET / HTTP/0.0

Our objective is to enumerate the supported by the web server (in this case www.cia.gov) HTTP version numbers, following the two digit format that it has. We could be a lot more agressive here and test for buffer overflows and all types of injection; that would be out of line without the authority to do so. Instead we are going to see how JBroFuzz will iterate through the values of 0.0 to 1.4 by means of adding a Fuzzer to our base request.

• Highlight the second zero from the line 'GET / HTTP/0.0' and right-click, selecting 'Add'. This is depicted in the screeshot below:

Adding a Fuzzer to the HTTP version number

• From the appearing 'Add a Fuzzer' window, select as 'Category Name', in the most left column 'Base' and as 'Fuzzer Name' in the middle column 'Base 10 (Decimal) Alphabet.

• Click on 'Add Fuzzer' on the bottom right of the window

Adding a Fuzzer

This should add a Fuzzer of length 1 that iterates over the decimal (i.e. base 10) numbers 0 to 9. If we have added a hexadecimal Fuzzer instead of a decimal one (i.e. base 16) the iteration would from 0 to F. If we had selected two digits instead of one and proceeded to add a decimal Fuzzer, the iteration would be from:

00
01
..
98
99

From a User Interface (UI) perspective you should see a line added to the 'Added Payloads Table'.

• Click 'Start' [Ctrl+Enter]

This process will send 10 requests to the specified web server changing only first line of the request to:

GET / HTTP/0.0...
GET / HTTP/0.1...
...
GET / HTTP/0.8...
GET / HTTP/0.9...

While this is ongoing, you can sort the results by 'No' in the 'Output' table in the bottom of the 'Fuzzing' tab. This should enable you to see what request is currently being transmitted and received in real time.

Once complete, change the first line of the 'Request' field to read:

GET / HTTP/1.0

• Click 'Start' [Ctrl+Enter]

The resulting output should resemble the following screenshot:

JBroFuzz Output from a Fuzzing Session

Straight away we can notice a difference in the response size: For HTTP version numbers 0.0 to 0.9 we are getting back what seems fairly big in size responses; 32222 bytes in size worth of responses, given that HTTP protocol version 0.0 to 0.8 do not officially exist!

By double-clicking on one of these requests, we can see that the web server in question is responding back with no headers, yet returning a full HTML body; this represents the 32222 bytes of response of data we are receiving back. The following screenshot illustrates this:

JBroFuzz Output for a Single Request/Response

Using the 'Graphing' tab we can proceed to graph the particular requests and responses for this given session.

• Within the 'Graphing' tab, click 'Start' [Ctrl+Enter].

• Select the directory corresponding to the Output folder we have used for this fuzzing session. This will typically be the last one.

• Right-click and select 'Graph'

Once complete, browse to the 'Response Size' tab within the 'Graphing' tab, as illustrated in the screenshot below:

JBroFuzz Graphing different 'Response Sizes'

To re-iterate this does not present a security vulnerability in any shape or form; merely the fact that by manipulating HTTP version numbers as part of the request we transmit, we can impact the response that we get back. In this case, what changes is the non-existent header fields, with some HTML content being received back.

If I was to guess what is causing this, I would say that some sort of load balancing or content delivery is not happening as it should when non-existent version numbers are being transmitted.

Performing User Enumeration with a Valid Set of Credentials

Often you encounter an application that allows for the enumeration of one or more pages after a user has been successfully granted a set of session credentials. One of the key areas to test from an application specific perspective, relates to the page(s) that provide user account information.

In the following example, we investigate an ASP.NET 2.0 application with a C# back-end. In this, an authenticated user has the option to select to "View My Profile". This page provides them with account information (including the typical username, email address, further notes) that they can proceed to update and save to the back-end system.

After a user has authenticated, the following URL, gives them access to their profile information stored on the database:

http://www.myattackingdomain.com/portal-location/UserInfo.aspx?UserID=23

Simple investigation confirms that the digits allowed as part of the UserID value are decimal numbers only. Lets feed that information into JBroFuzz.

• Within JBroFuzz, select:

File -> Open Location [Ctrl+L]

Type: http://www.myattackingdomain.com/portal-location/UserInfo.aspx?UserID=23 and hit enter. This is depicted in the following screenshot:

JBroFuzz 'GET' Request with a 'UserID' parameter

JBroFuzz Development Corner

This section presents how to setup and use JBroFuzz as a fuzzing library. Also, it offers an insight in how to setup and compile your own version of JBroFuzz. As different people have different levels of expertise of the java programming language, eclipse, ant and subversion, some of the steps presented herein might be considered basic by advanced developers.

Setting up a JBroFuzz Development Environment

This section guides you towards setting up a development environment for JBroFuzz. Despite the Operating System (O/S) being windows XP, a similar process can be followed in a number of other O/S.

You will need to have installed:

  • Tortoise SVN (using TortoiseSVN-1.6.6.17493-win32-svn-1.6.6.msi)
  • Eclipse Java (using eclipse-java-galileo-SR1-win32.zip)

Optionally, if you don't like building your application through eclipse you could also require to install Apache Ant.

Step 1: Obtain the source code

JBroFuzz uses SubVersion with the repository being publicly available for download through anonymous access on sourceforge. There is a plan to move it the source to the OWASP Git repository, but until then, use the guidelines below.

Tortoise SVN Check out JBroFuzz Source Code

Right click on the folder location where you want to download the source code and select:

  • SVN Checkout

In the "URL of repository", enter:

https://jbrofuzz.svn.sourceforge.net/svnroot/jbrofuzz

In the "Checkout directory", enter the folder location of your choice, in this case:

C:\root\code\jbrofuzz

In the "Checkout Depth" select:

  • Fully recursive

Untick "Omit Externals" (should be unticked by default)

In the "Revision" select:

  • "Head revision"

Select OK.

This process, once complete will checkout the entirety of the JBroFuzz source code from the SVN repository on sourceforge.

Step 2: Configuring a JBroFuzz Project within Eclipse

Having obtained the latest copy of the source code, the next step entails importing that source code within the Eclipse IDE.

Within Eclipse, select:

File -> New -> Other

From the "New" panel that appears, select:

Java -> Java Project from Existig Ant Buildfile

Import JBroFuzz Code into Eclipse from Ant File

Select "Next".

In the next menu, under "Ant buildfile", select "Browse".

Browse to the location where you have just (step 1) downloaded the source code and select the following file:

  • build.xml

The build.xml file is an Ant build file that JBroFuzz uses.

Select the Ant File

Selecting that file should have populated the "Project name" as jbrofuzz and also given you:


"javac" task found in target "compile"

MAKE SURE TO TICK:

  • "Link to the buildfile in the filesystem"

Otherwise eclipse will try to replicate the source code within your workspace and that makes the process a tiny bit more complicated when it comes to actually building JBroFuzz.

Click "Finish"

You will see the item "Building workspace (76%) on the bottom right hand side of Eclipse. Once that is complete, you should see the jbrofuzz project on the top left corner of the Package Explorer within Eclipse.

Step 3: Building JBroFuzz

Within the Package Explorer, expand the jbrofuzz project and double-click on the build.xml file.

Right click on the "build [default]" task within the "Outline" window (typically seen on the right hand side) and select:

Run As -> 1. Ant Build [Alt+Shift+X, Q]

If the build has been successful, a JBroFuzz.jar file within the the /jar folder would have been created. Following the path conventions above that should be in:

C:\root\code\jbrofuzz\jar\JBroFuzz.jar

Building JBroFuzz within Eclipse

How to Use JBroFuzz as a Fuzzing Library

Quite often what you need to do in terms of fuzzing, far exceeds the User Interface (UI) of JBroFuzz. For this reason, a set of core fuzzing APIs have been made available that can be used for more advanced fuzzing scenarios.

The JBroFuzz.jar standalone archive (made available with every release) carries a core fuzzing library that holds a number of key classes. These are located under:

org.owasp.jbrofuzz.core.*;
-Database.java
-Fuzzer.java
-FuzzerBigInteger.java
-NoSuchFuzzerException.java
-Prototype.java

The class of importance is Fuzzer.java. If you are going to use recursive iterators of great length, there is also FuzzerBigInteger.java. The difference between the two is that Fuzzer.java uses the primitive java data type long (up to 16^16 values) while FuzzerBigInteger.java uses java BigInteger to perform the counting. Naturally, the class FuzzerBigInteger is slower and takes more memory than the Fuzzer class.

Within JBroFuzz a Fuzzer is an instance of a java Iterator. This implies that values can be accessed by simply calling the next() method once an object has been made available. Typically, a call to hasNext() should also be performed prior to avoid an exception being thrown.

A Fuzzer can be obtained from the factory method createFuzzer(String, int); available for every instance of the fuzzing Database. Ergo:

Database myDatabase = new Database();

Fuzzer myFuzzer = myDatabase.createFuzzer("FUZ-ZER-ID0", 5);

So how do I use the API? Here is a simple HelloFuzzer (file called HelloFuzzer.java) example:

import org.owasp.jbrofuzz.core.*;

public class HelloFuzzer {

 public static void main(String[] args) {

 Database fuzzDB = new Database();

 try {
     for(Fuzzer f = fuzzDB.createFuzzer("NUM-HEX-LOW", 4); f.hasNext();) {
       // Get the next payload value...
       System.out.println(" The fuzzer payload is: " + f.next());
     }
   } catch (NoSuchFuzzerException e) {
       System.out.println("Could not find fuzzer " + e.getMessage());
 }

 }

} // HelloFuzzer.java OWASP JBroFuzz Example 1

To compile the above use:

javac -classpath ".\jbrofuzz\jar\JBroFuzz.jar" HelloFuzzer.java

This assumes that you are currently inside the directory where HelloFuzzer.java resides and that the JBroFuzz.jar is located two directories within your current location i.e. in jbrofuzz/jar.

Within the JBroFuzz.jar file, there is a file called fuzzers.jbrofuzz that carries all the fuzzer definitions that you see in the UI payloads tab of JBroFuzz.

Fuzzers belong in categories (1 to many) and each fuzzer carries a set of payloads that define the alphabet of the fuzzer.

Also, you have replacive or recursive fuzzers, based on the OWASP testing guide v2. For example, the hexadecimal alphabet is fuzzer definition is:

R:NUM-HEX-LOW:Base16 (Hex) Lowercase:16
> Number Systems | Base | Recursive Fuzzers | Lowercase Fuzzers
0
1
2
3
4
5
6
7
8
9
a
b
c
d
e
f

stealing from the file fuzzers.jbrofuzz.

There is very little preventing you from defining your own fuzzers within this file, by following the file format specified above. You can use the UI to see if they have been loaded successfully.

Further to recursive and replacive fuzzers you also have zero fuzzers (i.e. a zero fuzzer of 1000 will just transmit 1000 requests as they are, without adding any payloads) double fuzzers, cross product fuzzers, etc.

Notice the factory method Database.createFuzzer("NUM-HEX", 4) yielding: "I want a 4 digit recursive fuzzer (why because NUM-HEX is recursive in its definition, starts with R: instead of P:) of HEX digits."

Thus the above scenario would iterate through all the digits from 0000 to ffff. I wouldn't recommend using the above scenario for such trivial fuzzing capabilities; simply presented as an example of the inner workings of JBroFuzz.jar

A more detailed code breakdown of the above HelloFuzzer example can be found below:

/**
 * JBroFuzz API Examples 01
 *
 * JBroFuzz - A stateless network protocol fuzzer for web applications.
 * 
 * Copyright (C) 2007, 2008, 2009 [email protected]
 *
 * This file is part of the JBroFuzz API examples on how to use the 
 * fuzzer libraries included in JBroFuzz.jar.
 * 
 * JBroFuzz is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 * 
 * JBroFuzz is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 * 
 * You should have received a copy of the GNU General Public License
 * along with JBroFuzz.  If not, see <http://www.gnu.org/licenses/>.
 * Alternatively, write to the Free Software Foundation, Inc., 51 
 * Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 * 
 * Verbatim copying and distribution of this entire program file is 
 * permitted in any medium without royalty provided this notice 
 * is preserved. 
 * 
 */

import org.owasp.jbrofuzz.core.NoSuchFuzzerException;
import org.owasp.jbrofuzz.core.Database;
import org.owasp.jbrofuzz.core.Fuzzer; 

/**
 * <p>In JBroFuzz a Fuzzer is a java Iterator.</p>
 * 
 * <p>In order to create a Fuzzer, use the factory method
 * Database.createFuzzer(String, int), passing as arguments
 * the Fuzzer ID and the specified length as a positive int.</p>
 * 
 * <p>Be careful to check that the fuzzer ID (labelled as f_ID)
 * is actually an existing ID from the Database of Fuzzers.</p>
 * 
 * <p>Expected Output:</p>
 * <code>
 *  The fuzzer payload is: 00000<br>
 *  The fuzzer payload is: 00001<br>
 *  ...<br>
 *  (a total of 16^5 = 1048576 lines)<br>
 *  ...<br>
 *  The fuzzer payload is: ffffd<br>
 *	The fuzzer payload is: ffffe<br>
 *	The fuzzer payload is: fffff<br>
 * </code>
 * 
 * <p>For more information on the Database of Fuzzers, see the
 * HelloDatabase Class.</p>
 * 
 * @author [email protected]
 * @version n/a
 */
public class HelloFuzzer {

	/**
	 * @param args
	 */
	public static void main(String[] args) {

		// You have to construct an instance of the fuzzers database
		Database fuzzDB = new Database();
		// You have to supply a valid fuzzer ID
		String f_ID = "NUM-HEX-LOW";
		// You have to supply a (+)tive int
		int f_len = 5;
		
		try {
			
			for(Fuzzer f = fuzzDB.createFuzzer(f_ID, f_len); f.hasNext();) {
				
				// Get the next payload value...
				System.out.println(" The fuzzer payload is: " + f.next());
				
			}

		} catch (NoSuchFuzzerException e) {
			
			System.out.println("Could not find fuzzer " + e.getMessage());
			
		}

	}

}

Also, the second example below focuses on accessing the Database of Fuzzers. In JBroFuzz, all Fuzzers are stored in a Database object that you will be required to construct in order to access them.

/**
 * JBroFuzz API Examples 02
 *
 * JBroFuzz - A stateless network protocol fuzzer for web applications.
 * 
 * Copyright (C) 2007, 2008, 2009 [email protected]
 *
 * This file is part of the JBroFuzz API examples on how to use the 
 * fuzzer libraries included in JBroFuzz.jar.
 * 
 * JBroFuzz is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 * 
 * JBroFuzz is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 * 
 * You should have received a copy of the GNU General Public License
 * along with JBroFuzz.  If not, see <http://www.gnu.org/licenses/>.
 * Alternatively, write to the Free Software Foundation, Inc., 51 
 * Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 * 
 * Verbatim copying and distribution of this entire program file is 
 * permitted in any medium without royalty provided this notice 
 * is preserved. 
 * 
 */

import org.owasp.jbrofuzz.core.NoSuchFuzzerException;
import org.owasp.jbrofuzz.core.Database;
import org.owasp.jbrofuzz.core.Fuzzer; 

/**
 * <p>In JBroFuzz all Fuzzers are stored in a Database
 * object that you will be required to construct in order
 * to access them.</p>
 * 
 * <p>Within the Database, each Fuzzer is a collection of 
 * payloads, which carries a unique ID string value.</p>
 * 
 * <p>Example ID values are the output of this program:</p>
 * <code>
 *  The fuzzer ID is: LDP-INJ<br>
 *	The name of the fuzzer is:			LDAP Injection<br>
 *	The id of the fuzzer is:			LDP-INJ<br>
 *	The of payloads it carries (it's alphabet) is:	20<br>
 *	It has as 1st payload:<br>
 *		|<br>
 *  The fuzzer ID is: XSS-IE4-567<br>
 *	The name of the fuzzer is:			XSS IE<br>
 *	The id of the fuzzer is:			XSS-IE4-567<br>
 *	The of payloads it carries (it's alphabet) is:	38<br>
 *	It has as 1st payload:<br>
 *		< img src=`x` onrerror= ` ;; alert(1) ` /><br>
 *
 * </code>
 * 
 * <p>Do not be confused between Prototypes and Fuzzers; 
 * JBroFuzz uses Prototype objects to construct the Fuzzers
 * that get added into the Database upon initialisation.</p>
 * 
 * <p>As a result, the getter methods available within a Database
 * object can carry the name of getAllPrototypeIDs and 
 * getAllFuzzerIDs interchangebly.</p>
 * 
 * @author [email protected]
 * @version n/a
 */
public class HelloDatabase {

	/**
	 * @param args
	 */
	public static void main(String[] args) {

		// You have to construct an instance of the fuzzers database
		Database fuzzDB = new Database();

		// Get a list of all the fuzzer IDs from the database
		String[] fuzzer_IDs = fuzzDB.getAllPrototypeIDs();
		
		System.out.println("The fuzzer IDs found are:");
		
		for(String fuzzerID : fuzzer_IDs) {
			
			System.out.println("The fuzzer ID is: " + fuzzerID);
			
			// We pass of length of 1, irrelevant if we are
			// just going to access the first payload
			// of the fuzzer
			Fuzzer fuzzer;
			try {
				
				fuzzer = fuzzDB.createFuzzer(fuzzerID, 1);
				// Normally you should check for fuzzer.hasNext()				
				String payload = fuzzer.next();
				
				System.out.println("\tThe name of the fuzzer is:\t\t\t" + fuzzer.getName() );
				System.out.println("\tThe id of the fuzzer is:\t\t\t" + fuzzer.getId() );
				System.out.println("\tThe of payloads it carries (it's alphabet) is:\t" + fuzzDB.getSize(fuzzerID));
				System.out.println("\tIt has as 1st payload:\n\t\t" + payload );

			} catch (NoSuchFuzzerException e) {
				System.out.println("Could not find the specified fuzzer!");
				System.out.println("Going to print all the fuzzer IDs I know:");
				// old vs new for loop :)
				// in case of an error, print just the 
				// fuzzer IDs, accessed from the DB
				for(int j = 0; j < fuzzer_IDs.length; j++) {
					System.out.println("The fuzzer ID is: " + fuzzer_IDs[j]);
				}
				
			}
			
		}
		
	}

}

A final example of this section, involves seeing the usage of all the method calls available in the Fuzzer.java class

/**
 * JBroFuzz API Examples 03
 *
 * JBroFuzz - A stateless network protocol fuzzer for web applications.
 * 
 * Copyright (C) 2007, 2008, 2009 [email protected]
 *
 * This file is part of the JBroFuzz API examples on how to use the 
 * fuzzer libraries included in JBroFuzz.jar.
 * 
 * JBroFuzz is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 * 
 * JBroFuzz is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 * 
 * You should have received a copy of the GNU General Public License
 * along with JBroFuzz.  If not, see <http://www.gnu.org/licenses/>.
 * Alternatively, write to the Free Software Foundation, Inc., 51 
 * Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 * 
 * Verbatim copying and distribution of this entire program file is 
 * permitted in any medium without royalty provided this notice 
 * is preserved. 
 * 
 */

import org.owasp.jbrofuzz.core.NoSuchFuzzerException;
import org.owasp.jbrofuzz.core.Database;
import org.owasp.jbrofuzz.core.Fuzzer; 

/**
 * <p>Example iterating through all the methods available
 * in the Fuzzer Object and their respective outputs.</p>
 *
 * @author [email protected]
 * @version n/a
 */
public class IndigoFuzzerTests {

	/**
	 * @param args
	 */
	public static void main(String[] args) {

		// You have to construct an instance of the fuzzers database
		Database fuzzDB = new Database();
		// You have to supply a valid fuzzer ID
		String f_ID = "NUM-HEX-LOW";
		// You have to supply a (+)tive int
		int f_len = 5;

		try {
			
			Fuzzer f = fuzzDB.createFuzzer(f_ID, f_len);

			while(f.hasNext()) {
				
				// Could do this via reflection, but..
				f.next();
				// System.out.println(" The fuzzer payload is: " + f.next());
				System.out.println(" The maximum value is: " + f.getMaximumValue());

				System.out.println(" The current value is: " + f.getCurrectValue());
				

				
			}


		} catch (NoSuchFuzzerException e) {
			
			System.out.println("Could not find fuzzer " + e.getMessage());
			
		}

	}

}