This site is the archived OWASP Foundation Wiki and is no longer accepting Account Requests.
To view the new OWASP Foundation website, please visit https://owasp.org

Difference between revisions of "Android Testing Cheat Sheet"

From OWASP
Jump to: navigation, search
(M7 - Client Side Injection)
(M3 - Insufficient Transport Layer)
Line 49: Line 49:
  
 
* Identify all ssl endpoints.
 
* Identify all ssl endpoints.
 
 
* Perform SSL Cipher Scan using (sslscan)[https://github.com/rbsec/sslscan] or simmilar software. ensure following
 
* Perform SSL Cipher Scan using (sslscan)[https://github.com/rbsec/sslscan] or simmilar software. ensure following
 
   * SSLv2, SSLv3 is disabled
 
   * SSLv2, SSLv3 is disabled
Line 59: Line 58:
 
   * SSL Certificate is from Trusted RootCA
 
   * SSL Certificate is from Trusted RootCA
 
   * SSL Certificate is not expired
 
   * SSL Certificate is not expired
 
  
 
2. On Device Side
 
2. On Device Side
 
 
   1. Ensure application is working correctly by navigating around.
 
   1. Ensure application is working correctly by navigating around.
 
 
   2. Put a proxy in between the application and remote server. If application fails to load. Application might be doing cert validation. Refer logcat if any message is printed.
 
   2. Put a proxy in between the application and remote server. If application fails to load. Application might be doing cert validation. Refer logcat if any message is printed.
 
 
   3. Place Proxy RootCA in trusted root CA list in device. (Burp)[https://support.portswigger.net/customer/portal/articles/1841101-configuring-an-android-device-to-work-with-burp] (OWASP-ZAP)[https://security.secure.force.com/security/tools/webapp/zapandroidsetup]
 
   3. Place Proxy RootCA in trusted root CA list in device. (Burp)[https://support.portswigger.net/customer/portal/articles/1841101-configuring-an-android-device-to-work-with-burp] (OWASP-ZAP)[https://security.secure.force.com/security/tools/webapp/zapandroidsetup]
 
 
   4. Try using application again. If application still doesn't connect, application might be doing cert pinning.
 
   4. Try using application again. If application still doesn't connect, application might be doing cert pinning.
 
 
   5. Install (Xposed Framework)[http://repo.xposed.info/module/de.robv.android.xposed.installer] and (Just Trust Me)[https://github.com/Fuzion24/JustTrustMe], enable JustTrustMe and then reboot device.  
 
   5. Install (Xposed Framework)[http://repo.xposed.info/module/de.robv.android.xposed.installer] and (Just Trust Me)[https://github.com/Fuzion24/JustTrustMe], enable JustTrustMe and then reboot device.  
 
 
   6. Try again if everything works we have a application which employee's cert pinning.
 
   6. Try again if everything works we have a application which employee's cert pinning.
  

Revision as of 18:32, 18 March 2016

Cheatsheets-header.jpg

Last revision (mm/dd/yy): 03/18/2016

Introduction

DRAFT MODE - This Cheat Sheet is a Work in Progress

This cheat sheet provides a checklist of tasks to be performed to do a penetration test of an Android application. It follows the OWASP Mobile Top 10 Risks list.

Testing Methodology

At the device level, there are 2 ways in which the application shall be tested.

  1. With Android device running in a factory default or normal mode
  2. With Android device running in a rooted mode

At the application level, there are 2 ways in which it shall be tested

  1. Application running on the device (to take benefits of touch related features)
  2. Application running on the emulator (to ease the task of testing using wider screen of desktop or laptop)

Application Mapping

Map the application for possible security vectors

  1. What is the application genre ? (Game, business, productivity etc)
  2. Does the application connect to backend web services?
  3. Is the application purely native or incorporates readymade frameworks?
  4. Does the application store data on the device?
  5. What all features of the device are used by the application? (camera, gyroscope, contacts etc)

OWASP Step-by-step Approach

(For each of the standards below, there shall be multiple steps for the tester to follow])

M1 - Weaker Server side controls

M2 - Insecure Data storage

This Section should be ideally tested after using the application for some time. This way application has time to store some data on the disk.

Commonplaces to look at

  • /data/data/app_folder
  • /sdcard/
  • /sdcard1/

M3 - Insufficient Transport Layer

Multiple layer of checks to be performed here

1. On Server side

  • Identify all ssl endpoints.
  • Perform SSL Cipher Scan using (sslscan)[1] or simmilar software. ensure following
 * SSLv2, SSLv3 is disabled
 * TLS 1.2, 1.1 and 1.0 is supported (1.2 is essential to ensure highest possible secure connection)
 * RC4 and CBC Based Ciphers are disabled
 * DH Params are >2048 Bits
 * SSL Certificate is signed with atleast sha2 / sha256
 * ECDHE Ciphers / Ciphers supporting Perfect forward secrecy are preferred
 * SSL Certificate is from Trusted RootCA
 * SSL Certificate is not expired

2. On Device Side

 1. Ensure application is working correctly by navigating around.
 2. Put a proxy in between the application and remote server. If application fails to load. Application might be doing cert validation. Refer logcat if any message is printed.
 3. Place Proxy RootCA in trusted root CA list in device. (Burp)[2] (OWASP-ZAP)[3]
 4. Try using application again. If application still doesn't connect, application might be doing cert pinning.
 5. Install (Xposed Framework)[4] and (Just Trust Me)[5], enable JustTrustMe and then reboot device. 
 6. Try again if everything works we have a application which employee's cert pinning.

M4 - Unintended Data Leakage

Simmilar to M2 this section requires application to be used however while the application is in use we need to monitor following places.

  • adb logcat output
  • cache and webcache folder locations

M5 - Poor Authorization and Authentication

One of the simplest check's to be performed after application is used for some time and it has time to put the data inside system.

  • enumerate all exported activities
  • start each activity and identify if the activity was suppose to be publicly accessible or not.
  • Any activity displaying confidential information should be behind authentication. (confidential information includes PII (Personally identifiable data), financial data etc)

M6 - Broken Cryptography

There are multiple things to look at

  • Usage of known weak crypto algo's like Rot13, MD4, MD5, RC2, RC4, SHA1
  • Do it Yourself / let me design my own algo for encryption
  • Secret key hard coded in the application code itself.

M7 - Client Side Injection

Android applications need to store data locally in sqlite files or XML structures and hence need to performs either SQL/XML Queries to DB or file read calls. This gives rise to 2 major issues.

1. SQL / XML injection, and if the reading intent is publically exposed another application could read this. 2. Local file read which can allow other application to read files of the application in question and if they contain sensitive data then data leakage via this media.

Besides this if we are dealing with HTML5 / Hybrid application XSS or Cross Site Scripting can also be considered. This XSS will expose the entire application to attacker as HTML5 applications will have wrapper to call native functionality and hence XSS will have control over entire application.

M8 - Security Decisions via untrusted inputs

M9 - Improper Session Handling

M10 - Lack of Binary Protection

Authors and Primary Editors

Jim Manico

Jonathan Carter

Prashant Phatak

Milan Singh Thakur

Anant Shrivastava

Other Cheatsheets